Hot

Hardware Connection

If you don't know how to connect the equipment?

中位机与下位机串口连接，两个口为并口，任取其一；下位机与下位机连接，也是任意其中一口一直往下扩展；只有一台中位机的时候，中位机上的网口与电脑网口相连，如有多台中位机的时候，中位机网口插入的网线，接入到交换机网口，或者是路由器的LAN口。
If you don't know how to use clamps?

夹具线都有正负极线码管，可根据V＋，I+，V-，I-来接线。
The middle machine can be connected, but the lower machine can not be connected.

The middle machine can be connected, but the lower machine can not be connected.
How to modify the repeated equipment number about 3008/ 4008 series?

使用我司校准软件完成箱号修改内容。
If you find there's no channel display on software, when you connect the new equipment with the previous equipment in the same series. What should you do?

新设备过去需要通过中位机重新搜索一下新到的设备，重新映射一次即可。
After automatic disconnection, you find it automatic connection again.

检查下电脑到交换机及设备间的网络连接是否正常。
If ther are 10 equipments mapping, there are only 8 equipments display.

客户端默认1*8映射方式，可以更改客户端配置文件选择1*16。
You are prompted IP conflict or IP occupied when you set IP.

可配合按键与液晶屏设定IP地址。